When using a commercial floor scrubber, there are several key points that need special attention to ensure efficient operation, extend service life, and ensure cleaning effectiveness:

1. Preliminary inspection:

Drainage valve: Confirm that the drainage valve is in an open state so that sewage can be discharged smoothly.

Clear water tank: Check if the clear water tank is filled with water and confirm that the water quality is clean.

Filter and water supply pipe: Ensure that the filter is not blocked and the water supply pipe is unobstructed.

Brush disc and bristles: Select the appropriate brush disc and bristles based on the ground material, and check if the brush disc is worn.

Machine integrity: Confirm that all components have been correctly installed and the machine is in good condition.

2. Preparation before operation:

Read the user manual carefully and understand the machine operation and safety guidelines.

Training: Untrained personnel should not operate the machine to ensure that the operator is familiar with the equipment.

Pre cleaning: Clean up large particles and debris in advance to avoid damaging the machine or clogging the suction scraper.

3. Use of cleaning agents:

Choose the appropriate cleaning agent: Choose a suitable low foam cleaning agent based on the floor material to avoid damaging the machine.

Moderate addition: add detergent according to the instructions. Excessive foam may affect the water absorption effect.

4. Operation process:

Control speed and force: Push steadily to avoid forcing the machine to move and avoid damaging the machine or the ground.

Adjusting brush pressure: Adjust the pressure of the brush on the ground according to the degree of stains.

Water absorption and cleaning: For very dirty floors, you can clean them several times before turning on the water absorption function.

5. Maintenance:

Timely cleaning: Immediately empty and clean the dirty water tank after use, and regularly clean the clean water tank and filter.

Dismantling and cleaning: Regularly remove the brush disc and water absorbent scraper for thorough cleaning.

Storage environment: Store in a dry, ventilated, and non corrosive gas environment, avoiding direct sunlight.

Battery maintenance: If it is a battery type floor scrubber, it needs to be charged regularly, and discharged and charged for maintenance when not in use for a long time.

Following the above key points can ensure the excellent performance of commercial floor scrubbers, effectively improve cleaning efficiency, and maintain the long-term stable operation of the equipment.